Sophos XGS 4300 Guia De Inicio Rapido página 4

Other Ports Type
COM RJ45/Micro USB
USB USB 3.0 (Type A)
MGMT RJ45 (10/100/1000 Mbps)
Reset Button
Module Slots
A/B
Compatible Modules
*
8 port GbE copper
8 port GbE SFP
4 port GbE copper – 2 Bypass groups
4 port 10 GbE SFP+
4 port 2.5 GbE copper PoE
4 port GbE copper PoE + 4 port GbE copper
2 port GbE fiber (LC) Bypass + 4 port GbE SFP
Quick Start Guide XGS 4300/4500
Comment
You can connect a serial console to either the RJ45 or micro USB COM port to access the CLI. Only one
port can be used at any time. If both ports are connected then the micro USB port will take precedence.
The required connection settings are:
Ì Bits per second: 38,400
Ì Data bits: 8
Ì Parity: N (none)
Ì Stop bits: 1
You can connect a USB 2.0 or 3.0 compatible device to this port (e.g. USB thumb drive, UPS, 3G/4G dongles)
We recommend using this dedicated port to connect your Admin PC.
Press and hold for >10 seconds to reset the unit to factory default settings.
All configuration, reports and patterns will be flushed.
Type
Flexi Port
Comment
Can be used for any Flexi Port module listed in the table below
COMMENT
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
ENGLISH
* SFP/SFP+ transceivers are sold separately
3