Publicidad
Idiomas disponibles
Idiomas disponibles
CUSTOMIZING TV SETTINGS
Initial Setup
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
• In Standby Mode, press the
turn the TV on. The red LED indicator will turn blue.
• The first time you turn the TV on, it will go into the Setup Wizard. Press
buttons to select your desired mode and press OK to
Home (Energy Star)
And Home (Energy Star)
®
STAR
. Any changes to default as-shipped television configuration and settings
would change the energy consumption. And enabling certain optional features and
functionalities may increase energy consumption beyond the limits required for
®
ENERGY STAR
Retail Mode : Select Retail Mode if you would like your picture to be brighter. At
times this mode may use more energy to operate the Volume/Sound Mode and the
Picture Mode. In this setting, the power consumption may possibly exceed the limited
requirement of the ENERGY STAR
®
ENERGY STAR
is a set of power-saving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
®
ENERGY STAR
is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save money and protect the
•
The ON-MODE Power under Home Mode should be less than 46
W
• The SLEEP-MODE Power should be less than 0.5 W.
En
10
button on the main unit or on the remote control to
OK :Next
®
5
Network Status:Unconnected
ENERGY
Publicidad
