M
• Press
and
M
• Press
and
M
• Press
and
M
• Press
to confirm.
9.3
Register a Handset
Your handset is pre-registered to the base station. Up to five handsets
can be registered to a a single base station.
If for some reason, the handset is not registered to the base station,
REGISTER will be displayed on the handset screen, register your
handset following the process below.
• Press and hold
base station is entered into registration mode.
M
• Press
and
M
• Press
and you are requested to enter the 4-digit system PIN.
• Enter the 4-digit system PIN and press
NOTE
If the handset registration is successful, the handset will automatically
be allocated the next available handset number. This handset number
is shown in the handset display in standby mode.
10
CALLER DISPLAY (NETWORK DEPENDENT)
10.1
Call List
This feature is available if you have subscribed to the Caller Line
Identification service from your telephone company. Your phone can
store up to 50 received calls with date/time information in the Call List.
The number will be shown on the LCD when the phone is ringing. If the
number matches with one of the entries in your Private Phonebook,
the caller's name stored in the private phonebook will be displayed
with the number. The handset will ring with melody associated with
that phonebook entry.
.
to select HS SETTINGS.
.
to select ALARM.
.
to select ON or OFF.
on the base station for about five seconds, the
.
to select REGISTRATION.
M
to confirm.
15