Publicidad
ICE(InCar Entertainment)
INSTRUCTIONS TO FOLLOW BEFORE YOU START
To avoid interference in the sound signal, the headphones and screens must be set up
correctly.
The two screens must be set to different channels, and the headphones for each screen
must be set to the same channel as the screen. So, the headphones should always stay
together with the corresponding screen. In order not to mix them up, the headphones
can be marked as Left and Right.
1. Set the left screen to Channel A (*).
To do this, select the Menu as described above by pressing the Menu button on the
screen. (If the screen was not activated, press the Menu button twice to bring up the
menu).
Then select Channel A (*) in the headphones selection (2nd menu line).
Set the headphone switch to A (*).
2. Set the right screen to Channel B (*) in the same way.
Set the headphone switch to Channel B.
These settings will ensure optimum sound quality for your system.
See the Owner's Manual chapter 7.2 Setting of the monitor.
(*) On some systems, the channels are named Channel 1 & 2 instead of A & B.
Ch.A(1)
Manual Ref. no. AIM 000 573-0
CORRECT
Ch.B(2)
Ch.A(1)
Ch.B(2)
WRONG
Ch.A(1)
Ch.A(1)
29 of 30
Ch.A(1)
Ch.A(1)
Publicidad
