Publicidad
Idiomas disponibles
Idiomas disponibles
ILLUSTRATION
1
Mounting bracket
2
Mounting screws
3
Support cable 1 m
4
Plug with protection contact
5
Cable reel, closed
6
Cable stop
7
Extention cable 15 m
8
Earthing contact sockets
9
Thermal protection switch
10 Green indicator lamp, lights up when
thermal protection is not activated
11 Red indicator lamp, lights up when
thermal protection is activated
INSTALLING
This cable reel can be attached, as shown to
cement pillars, concrete walls or steel
constructions.
1. Take the product with accessories from the
packaging.
2. Choose a suitable location near a power
supply.
3. Use the bracket as a template to mark the
position of the screws and drill two holes at
the marked locations.
4. Attach the bracket accordingly with two
screws.
USE
Connecting the cable reel
1. Unroll the cable to the desired length, in order, to operate consumers with a total output up to
1,000 W.
2. Completely unroll the cable, in order, to operate consumers with a total output of more than 1,000
W up to 3,000 W.
3. Avoid tripping points when routing the cable.
4. Insert the mains plug of the cable reel into a mains socket fused and earthed correctly.
5. Check if the consumer is switched off and insert the mains plug of the consumer into the earthing
contact socket of the cable reel.
Unwind the cable
Pull out the cable to desired length and stop after "tactac" sound is heard.
Roll up the cable
1. Release the lock by one more pull and let the cable back.
2. Please always hold the end of the cable when it is going back to the hose box.
3. Turn off the power.
Trouble shooting
During the process of retracting/pulling out the cable, if the cable is locked, please pull out more cable
again, then retry the work.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
