Operation
Change the information on the screen
Briefly press
to change the information on the screen. You can toggle between the
following information:
VOL - Voltage / CUR - Amperage / WATT - Wattage
ODO - Accumulated mileage / DST - Trip mileage / TIME - Trip time
PAS level adjustment
Press
to adjust the level of pedal assistance.
or
Accompaniment mode
If you press and hold the button
for 3 seconds, it will start the motor at a constant
speed of 6km/h to carry the bike effortlessly while walking next to it. Pressing the
brake will deactivate the accompaniment mode.
Do not use it if we are mounted on it. We recommend not to abuse this assistance,
especially on long or very steep slopes.
Front light on/off
Long press for
for 3 seconds to turn on the front light. Long press
again to turn
it off.
Rear light on/off
The rear light is turned on directly from the power
button above it. Press several times to switch between
the 3 available modes: steady light, flashing light 1 and
flashing light 2.
The tail light is powered by 2 batteries, please remove
the screws and open the cover to change them when
you run out of battery.
Front fork
In the front fork you can lock or unlock the suspension (picture 1) and adjust its
pressure (picture 2).
Picture 1
Picture 2
8
YOU-RIDE DUBAI