Husqvarna LC 247S Manual De Instrucciones página 70

General
IMPORTANT! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.
Handle
Settings
Handle height
• Loosen the lower knobs.
• Slide the knobs to the ends of the grooves on both
sides of the machine.
• Handle height can be set to 2 different positions,
• Adjust to a suitable height.
• Slide the knobs up towards the handle until they stop
and a click is heard.
• Tighten the knobs properly.
Transport position
The handle assembly can be folded to minimize space
needed for transport and storage.
• Loosen the lower knobs.
• Slide the knobs to the ends of the grooves on both
sides of the machine.
70 – English
ASSEMBLING AND ADJUSTMENTS
• Fold in the engine brake handle towards the
handlebar.
• Fold forward the handle.
Operating position
• Fold in the engine brake handle towards the
handlebar.
• Fold the handle to its upright position.