FITFIU FITNESS BESP-50 Manual Usuario página 39

BESP-50
STEP 2
Loosen the locking knob (25) and pull out, insert the seat post (4) into the rear opening tube of the main frame (1).
Adjust the seat post (4) to the desired height and then tighten the locking knob (25).
Place the seat slider (6) on the seat post (4) and secure it with washer 10 (46) and octagonal knob M10 (44).
Place the seat (45) on the seat slide (6), secure the seat by tightening the seat locking nuts (pre-installed on the seat).
45
6
4
46
44
25
1
EN
39