Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3
Insert the handlebar post (5) into the front opening tube of the main frame (1) and tighten the locking knob (25).
Fasten the handlebars (7) to the handlebar post (5) with 4 hex bolts (42) and washers 8 (51). Then place the telephone
holder (36) on the handlebar (7) and press it down into place.
Place the monitor holder (40) on the handlebar (7) and secure it with the safety bolt (53). Insert the monitor (37) into the
monitor holder (40). Then connect the monitor cable (37) to the sensor cable (23) of the main frame.
NOTE: Connect the cables as
shown in the picture.
36
42
51
7
5
1
40
37
40
53
23
25
Publicidad
