Connecting it all together
The energiser can be operated from two internal D-Cell batteries (3v) or from an external 12v
battery (battery input lead purchased seperatley. - part number 47BL1
Lead connection
Connect the earth and fence leads to the
earth and fence connections on the base of
the energiser. Lead with the green croc clip
to the EARTH terminal
red terminal to the LIVE terminal
Battery connection
Depress the case locking clips on either
side of the energiser and lift the top clear
of the base. Insert the two D-cell batteries
in the direction indicated within the battery
holder. Replace the top ensuring that the
case clips lock back into place securely.
PRESS
PRESS
and lead with the
PRESS
x2 D-Cell
Pre
ene
eac