Inserting The Paper Roll - Microlife PR 1KA1 Instrucciones De Uso

3.4. Inserting the paper roll

• Switch the printer on.
• Insert the end of paper roll into the slot
of the internal compartment.
• Move the paper as deep as possible into
the slot.
• Press the paper feed button until paper
appears at the front.
• Put paper roll into the compartment and
close the lid (small paper roll) or put the
paper roll into the lid (big paper roll).
There are 2 kinds of paper rolls for use. The small size of paper roll is placed into
internal compartment. The big size of paper roll has to be placed into the outer
compartment which is the inside of the printer cover. Microlife sells extra paper rolls.
Note:
• The small paper roll is 1" thick (25mm-standard package) and 38mm wide.
• The big paper roll is 2" thick (50mm) and 38mm wide.
• If there are problems when inserting the paper, cut the edge of the paper so that
the corners of the paper are square (90°, see below).
Small paper roll
Big paper roll
5