Carrying Out A Printing Operation; Power On; Paper Feeding; Printing - Microlife PR 1KA1 Instrucciones De Uso

4. CARRYING OUT A PRINTING OPERATION

4.1. Power on

Before powering the printer, check if batteries are
inserted properly.
• Pushing the slide switch to "left" side in order
to power on the printer.
• Simultaneously, the green LED will become bright.

4.2. Paper feeding

Before you start the printing operation, check if
the paper is installed properly in the right position.
If it is not, click the paper feed button to get access
to proper location.
Note:
• Click once to get 1 line space.
• Continual depressing to get multi lines space.

4.3. Printing

• Connect the printer with the monitor as explained at 3.3.
• Push the print button on the monitor (for details please refer to the manual of
related monitor).

4.4. Low voltage indication

Once the LED is flashing under power-on operation,
it indicates that new batteries are needed.
• Once the batteries are replaced the printer will work.
Note:
• If the printer is connected with an adapter, this
will not happen.

4.5. Power off

After the printing task, just push the slide switch
to the "right" side in order to power off the printer.
• Simultaneously, the LED will become dark.
6
LED bright
LED bright
LED flashing