LG WM3400CW Manual Del Propietário página 26

26 OPERATION_WM3400CW
Cycle Modifier Buttons
Each cycle has default settings that are selected
automatically. Customize these settings using the
cycle modifier buttons. Press the button for the
desired modifier to toggle through the available
settings. The washer automatically adjusts the
water level for the type and size of wash load for
best results and maximum efficiency. Due to the
high-efficiency nature of this product, water levels
may be much lower than expected. This is normal
and cleaning/rinsing performance will not be
compromised.
Temp.
Temp. selects the wash and rinse temperature
combination for the selected cycle. Press the Temp.
button until the indicator light for the desired setting is
lit. All rinses use tap cold water .
Cold rinses use less energy. The actual cold rinse
temperature depends on the temperature of the cold
water at the faucet.
• Select the water temperature suitable for the type
of load you are washing. Follow the garment fabric
care labels for best results.
Spin
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy. Press the
Spin button until the desired speed is selected. Some
fabrics, such as delicates, require a slower spin
speed. To protect your clothing, not all spin speeds
are available for all cycles.
• The Spin button also activates the Drain+Spin cycle
to drain the tub and spin clothes; for example, if you
want to remove clothes before the cycle has ended.
To use Drain+Spin, press the Power button, then
press the Spin button repeatedly to select a spin
speed. Press the Start/Pause button to begin.
Spin Only
Press and hold the Spin button for 3 seconds.
Soil
Adjusting the soil level setting will modify the cycle
times and/or wash actions. Press the Soil button
until the desired soil level is selected.
• This feature needs more time for heavily soiled
loads or less time for lightly soiled loads.
Option Buttons
Your washer features several additional cycle options
that customize cycles to meet your individual needs.
To use these options, select the desired option after
selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE
• To protect your garments, not every feature is
available with every cycle.
• If the Start/Pause button is not pressed within a
certain time to start the cycle, the control will shut
off and all settings will be lost.
Cold Wash
This option saves energy by using cooler water while
increasing the wash and rinse times to maintain wash
performance.
NOTE
• Wash time will increase up to several minutes with
the Cold Wash option.
• For best wash results, only wash small loads (less
than 8 lb) with the Cold Wash option.
Signal
The washer plays a melody when the wash cycle
is finished. The buttons make a sound each time
a button is pressed. Use this option to adjust the
volume of the melody and button tones. Press and
hold the Cold Wash button for 3 seconds.