Publicidad
Idiomas disponibles
Idiomas disponibles
Model Number
Voltage
Anvil
Max. Tightening Torque
Max. Tightening Torque by hand
No Load Speed
Tool Weight (with battery 2.0Ah)
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 2A), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig. 2B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
B
A
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (see Fig.3).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
1English1
SPECIFICATIONS
Unit
V d.c.
in.
ft-lbs/Nm
ft-lbs/Nm
rpm
lbs/kg
ASSEMBLY
Fig. 2
English
-7
RW1216-2
12
1/4"sq.
30 / 40
59 / 80
0-300
2.75 / 1.25
Publicidad
