ARDES AR5A35 Instrucciones Para El Uso página 12

1 - On / Off / Speed knob
2 - Blades
3 - Grid
4 - Main body
5 - Supports
Support assembly.
Caution! The fan should always be switched off and does not connected
to the mains supply, if you mounting the fan.
To fix the supports to the main body:
- set the fan gently on the head. Use a soft surface to not damage the
top of the product.
- take care on the indication of the supports: "L" is the left support, "R"
is the right support. The "FRONT" indicator with the arrow on both
supports indicates the front side;
- slide the supports on the main body.
Pay attention that all the parts are correct and firmly connected with each
other.
Caution! Connect to the mains supply only after the fan has been fully
assembled. The fan must not be used without supports.
Place the fan on a dry and stable surface, make sure the on/off/speed
knob is in off position (0) and insert the plug on the socket.
Turn the on/off/speed knob to select the
desired speed:
0 - Off
1: Low speed
2: Middle speed
3: High speed
12
Technical informations
Instructions for use
1
2
3
4
5