Cooper Security Scantronic 771r Manual De Instrucciones página 3

The 771r Info module is designed to show a remote user the status of individual partitions
on the Homelink 75 alarm system. A built in sounder gives setting and unsetting tones, as
well as acting as an internal siren during an alarm.
OPERATOR CONTROLS AND DISPLAYS
The info module has a single column of eight LEDs that shows the following information:
(Power LED) Glows steadily when 12VDC power is present.
(Receive LED) Flashes every time the module detects a valid signal.
(Armed LED) glows when the partition is set.
(Alert LED) glows when a reset is required or control unit has some information
to display.
(Part set LED) glows when the partition is part set.
(Not Ready LED) glows if a detector is active during exit time.
(Entry/Exit LED) glows during entry/exit time.
1. Introduction
3
UK