Descargar Imprimir esta página

Johnson RM05 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

.- Set TIME ON and TIME OFF simultaneously
1. Set TIME ON according to procedures 1 and 2 specified in
TIME ON operation.
2. Set TIME OFF as the procedures 1 and 2 specified in TIME
OFF operation.
3. lf both the set time of TIME ON and TIME OFF not exceed
1 O hours, time OFF operation will activated 0.5 hour later
than time ON operation. lf both the set time of TIME ON and
TIME OFF exceed 1 O hours, time OFF operation will be
activated 1 hour later than time ON operation.
4. 0.5s after setting, remate controller will send TIME ON
command to the unit.
.- Modification of timer operation
Press corresponding button and readjust the time of time
ON and time OFF. Adjust the time figure to 0.00 to cancel the
timer operation.
NOTE: The time set in timer operation is the relative figure
based on the clock on remote controller. Adjusting clock is
unavailable when TIME ON or TIME OFF is activated.
8

Publicidad

loading