Nevir NVR-7417-42HD-N Manual De Instrucciones página 61

to confirm.
4.6 Connecting to External AV Signal Source (HDMI)
Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear
panel of the unit.
After connection, turn on the power of the unit and the external AV signal source and use the
SOURCE and the direction buttons to select HDMI mode, and then press the ENTER button
to confirm.
HDMI provides both audio and video signals and typically provides superior image
quality to component or composite.
4.7 Connecting to PC
The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure
below to connect:
9