Publicidad
Idiomas disponibles
Idiomas disponibles
Care + Maintenance
m
ATTENTION!
Before performing any cleaning or
maintenance, disconnect the unit from the power supply.
Never touch the moving blades.
m
WARNING!
Never spray or clean the hedge shears
with water.
1. Clean the hedge trimmer with a dry towel, particularly
the ventilation slits, after each use, or use a brush in the
event of heavy soiling. Spray the blades with lightweight
machine oil after each use.
2. Store the pole + hedge trimmer in the blade cover
provided and in a dry location out of the reach of children.
3. When servicing, use only identical replacement parts. Use
of any other parts can create a hazard or cause product
damage. Please contact an authorized Snow Joe
Sun Joe
dealer or call the Snow Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for all replacement parts and
accessories for your product.
Lubricate the Blades
For easier operation and longer blade life, lubricate the
hedge trimmer blade before and after each use.
1. Stop the motor and disconnect the unit from the
power supply.
2. Lay the pole + hedge trimmer on a flat surface. Apply
lightweight machine oil along the edge of the top blade
(Fig. 19). If you will be using the pole + hedge trimmer
for an extended period, it is advisable to stop work
intermittently in order to re-oil the blade.
Fig. 19
NOTE: Do not oil while the pole + hedge trimmer is running.
Sharpening the Blades
The blade must be re-sharpened if cutting performance and
behavior begin to deteriorate (i.e. if blades frequently snag
on branches).
1. Stop the motor and disconnect the unit from the power
supply. Clamp the blade in a vise.
2. File the exposed cutting surface of each blade tooth with
a smooth round file. Be sure to retain the original angle of
the tooth when filing.
3. Remove the blade from the vise, and power on the motor
4. Disconnect the pole + hedge trimmer from the power
m
with dull or damaged cutting blades. This may cause overload
and will give unsatisfactory cutting results.
Cleaning the Hedge Trimmer
1. Stop the motor and disconnect the unit from the
2. Clean dirt and debris from the body of the pole + hedge
NOTE: Do not use any strong detergents on the plastic housing
or the handle. These parts can be damaged by certain aromatic
+
®
oils such as pine and lemon, and by solvents such as kerosene.
+ Sun Joe
®
®
Storage
1. Always place the blade cover on the blade before storing
2. Clean the pole + hedge trimmer thoroughly before storing.
Disposal
Should your appliance need replacement after extended
use, do not dispose of it with the household refuse, but in an
environmentally safe way.
Service + Support
If your Sun Joe
requires service or maintenance, please call the Snow Joe
Sun Joe
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
11
until the unsharpened edges of the remaining blade teeth
are exposed.
supply and repeat the sharpening procedure as necessary.
WARNING!
Do not operate the pole + hedge trimmer
power supply.
trimmer using a damp cloth and mild detergent.
or transporting the pole + hedge trimmer. Use caution to
avoid the sharp teeth of the blade.
Store the hedge trimmer indoors, in a dry place that is
inaccessible to children. Keep away from corrosive agents
such as garden chemicals and de-icing salts.
Waste produced by electrical machine items should
not be handled like normal household rubbish. Please
recycle where recycle facilities exist. Check with your
local authority or retailer for recycling advice.
SJH904E electric pole + hedge trimmer
®
customer service center at 1-866-SNOWJOE
®
Record the following numbers from the housing or handle of your
new product:
Model #:
S J
H 9 0 4
E
Serial #:
+
®
Publicidad
