Gude GHS 500/7 TED Manual De Instrucciones Original página 33

E COLOURED MATERIAL
ASTIC MATERIAL -
NST DELAMINATION
m
Any damaged or disposed devices must
be delivered to appropriate collection
centres.
Remove all undesirable items, e.g. nails
and wire, before working
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as de-
vice overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations
Failure removal
Failures
Engine does not start
Wrong engine rotation direction
Splitting knife is not moving
Splitter has no power
The green supply button does not
hold after being pressed
Hydraulic pump is whistling, split-
ting knife running jerkily
3
2
4
1
Causes
No power in the socket
Defective electric extension cable
Wrong connecting cable
Defective condenser switch
Wrong connection
Adjust the two-hand control and
starting levers
Wrong rotation direction
Few hydraulic oil
Trigger is bent; hydraulic piston on
the valve is not fully seated
Wood has many knobs and the
splitting knife is getting stuck
Control arm is bent
Defective fuse, etc.
2-phase running
Oil loss, bottom contamination
Few hydraulic oil
and assembly manual, and normal wear and tear.
Important information for the customer
5
Please be sure to know that returning the product
in or after the warranty period must be made in the
original packaging.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles
bureaucracy at our web pages at www.guede.com
in the Servicing part. Please help us be able to help
you. In order to identify your device in case of claim
we need the serial No., product No. and year of pro-
duction. All this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Removal
Check the fuse
Pull the plug out, check it, replace it
5-wire connection at 2.5 mm2 cross
section
Have the machine checked by a
professional electrician
Use a screwdriver to turn the phase-
changing switch in the power supply
Defective control valve - to be
replaced in a service centre only
Have the rotation direction changed
by a professional
Hydraulic oil to be added
Check all screws on the trigger
Adjust the trigger so that the
hydraulic piston on the valve is fully
seated
Lubricate the splitting knife
Put the control arm back to the
starting position
Check the cable
Tighten the screws
hose
Hydraulic oil to be added
29
Replace the