Descargar Imprimir esta página

VelLight LEDA302 Manual Del Usuario página 6

Ocultar thumbs Ver también para LEDA302:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 Use the original packaging if the device is to be transported.
 Keep this manual for future reference.
4.
Features
 floodlight for commercial or residential use, entry monuments or
façades
 die-cast aluminium housing with tempered glass
 ribbed for maximum heat dissipation
 with adjustable bracket
 suited for outdoor use (IP65).
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
mounting bracket
2
hinge
6.
Installation
Guidelines
 A qualified technician should install and service this device.
 The construction to which the device is attached should be able to
support 4 times the weight of the device for one hour without
deformation.
 Never stand directly below the device when it is being mounted,
removed or serviced. Have a qualified technician check the device
once a year and once before you bring it into service.
 Overhead mounting requires extensive experience: calculating
workload limits, determining the installation material to be used...
Have the material and the device itself checked regularly. Do not
attempt to install the device yourself if you lack these
qualifications as improper installation may result in serious
injuries.
 This device is not suitable for dimming.
V. 01 – 15/03/2013
LEDA301/302/303
3
4
6
protective glass
LED
©Velleman nv

Publicidad

loading

Este manual también es adecuado para:

Leda301Leda303