Publicidad
Idiomas disponibles
Idiomas disponibles
1
Ø ⅜
NOTICE
A 110 V GFCI outlet is required.
> Reference the cabinet
specification to establish the
position of mounting bolts.
> Mark the holes to be drilled
for the anchors.
5
> Unlatch the hinge.
9
4x
> Attach side fronts with
four supplied screws.
2
4x S8
> Drill the anchor holes that
have been marked.
> Insert plastic anchors into
the holes.
6
> Plug the unit into outlet.
> Lift the unit up and onto
the mounting brackets.
10
8x
> Add eight supplied shelf
brackets.
3
4x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
7
> Check the cabinet is
leveled and securely
attached to the wall.
11
> Add the shelving to the
unit.
4
> Remove the mirror
fronts of the cabinet by
unlatching each hinge.
8
> Check the screws which
allow adjustment of the
unit.
> The top screw will adjust
front to back.
> The bottom screw will
adjust up and down.
> Make adjustments to the
level as needed.
12
2x
> Add two brackets.
MAL_Light and Mirror_LM9770/17.12.1
6
Publicidad
