Publicidad
Basic recording
1
Select the source you want to record.
Radio
Tune in to the radio station.
Prepare the disc playback mode.
Record all tracks
Select "OFF PLAYMODE"
(Z"Play menu").
Record programmed
Program the tracks you want.
tracks
Record a single
Select "1-TRACK"
track
(Z"Play menu").
Make sure the disc is stopped.
External equipment:
Connect and play the equipment.
2
Press [7/9, USB REC] or [7/9, MEMORY REC] to
start recording.
The name of the folder that keeps the recording is
shown.
Stop
Press [8].
recording
"WRITING" is shown.
Pause
Press [7/9, USB REC] or
recording
[7/9, MEMORY REC] during recording.
Press again to continue recording.
Note:
You can pause during recording from the
radio, music port or AUX (except in
SYNCHRO mode). A track mark is added
every time you pause.
Note:
• Wait for a few seconds for the system to prepare the
USB device before you start recording.
• USB recording indicator blinks during USB recording.
• When the next track is being recorded, it will be shown
on the display.
Basic playback
1
Press [MEMORY, USB] to select "MEMORY" or
"USB".
2
Press [4/9] to start playback.
Stop
Press [8] during playback.
playback
Press [4/9] to continue playback from the
start of the track.
OR
Press [8] two times to stop the playback fully.
For other operations, refer to "Disc".
Radio
Manual tuning
1
Press [RADIO, EXT-IN] (main unit:
[RADIO/EXT-IN]) to select "FM" or "AM".
2
Press [3] or [5] to select the frequency of
the required station.
Memory presetting
30 FM and 15 AM stations can be preset.
Automatic presetting
1
Press [OK] to select "LOWEST" or "CURRENT"
frequency.
2
Press [RADIO MENU] to select "A.PRESET" and
then press [OK].
"START?" is shown.
3
Press [OK] to start presetting.
To cancel, press [8].
Manual presetting
1
Press [3] or [5] to tune in to the station.
2
Press [PROGRAM].
3
Press the alphanumeric buttons to select a
preset number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Clock and timer
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
2
Within 10 seconds, press [R, T] to set the time.
3
Press [OK].
Press [CLOCK/TIMER] to show the clock for a few
seconds.
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select "OFF".
3
0
M
N I
→ 60 MIN → 90 MIN
→
120 MIN
To show the remaining time
Press [SLEEP].
→
O
F
F
19
19
Publicidad
