Impecca courant CTP-4152 Manual De Usuario página 6

BEFORE USING FOR THE FIRST TIME
1. Remove all packaging materials including those that may be inside the toasting
slots or toasting lever slot.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
3. Do not put the Toaster, cord or plug in water.
4. Make sure the crumb tray is locked in position on the bottom of the Toaster and
the toasting lever is in the UP position.
5. Plug the power cord into a standard 120V outlet.
6. Turn the browning selector knob to (1), the lightest setting.
7. Lower the toasting lever until it locks in place. Operate without bread once or twice
to burn off any manufacturing residue. You may notice a slight amount of smoke;
this is normal and will stop as the heating elements continue to heat.
AUTOMATIC CENTERING GUIDES
Lowering the toasting lever closes the centering guides, and holds the bread or toaster
food centrally in the toasting slots.
NOTE: The toasting lever will not lock down unless the Toaster is plugged into a 120 V AC
electrical outlet.
TOASTING INSTRUCTIONS
1. Make sure the crumb tray, located on the bottom of the toaster, is locked in posi-
tion, and the toasting lever is in the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place toaster on
a flat, level, heat resistant surface.
3. Plug the power cord into a standard 120V AC electrical outlet.
4. Position the browning selector knob to desired setting. To test toasting times for
browning, it is best to use both toasting slots. Position the browning selector knob
between 3 and 4 (medium); then adjust each subsequent toasting to your prefer-
ence.
5. Remove all protective wrappings from food before placing into the toasting slot(s).
6. IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that
may get lodged in toasting slot(s).
7. Insert bread or toaster food into the toasting slot(s). Lower the toasting lever until
locked into place. The automatic centering guides hold food upright for uniform
side-to-side toasting. When the bread is lowered into position, toasting will begin.
NOTE: When toasting a single slice, the bread may be placed in either toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening of the toaster; always
–6–