Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
WARNING
Please read and comply with these original
operating instructions prior to the initial
operation and store them for later use or
subsequent owners.
Please read the safety instructions of your
pressure washer.
Make sure there are no persons in the immediate
vicinity of the cleaning head.
Turn off the pressure washer when you finish
cleaning.
Maximum water temperature 104 °F (Please
read the instructions of your pressure washer).
Wear eye protection with side shields that
are marked to comply with ANSI Z87.1 when
operating this equipment.
After use or before servicing, always disconnect
the surface cleaner from the pressure washer
spray wand.
SYMBOL
WARNING
Do not hold the edge of the surface cleaner
when it is on.
PRODUCT INFORMATION
If any parts are damaged or missing, please call
1-888-90WORKS (888.909.6757) for Greenworks
customer service.
PRODUCT SPECIFICATIONS
Connection ............1/4 in. Quick Connect Plug Inlet
Cleaning With..................................................12 in.
Maximum Pressure .........................Up to 2300 PSI
Maximum Water Flow.................................2.3 GPM
Maximum Water Temperature........................ 104°F
See Fig 1
1. 1/4 in. Quick Connection
2. Casing
3. High Pressure Nozzle
4. Rotor Arm
1
2
4
3
Fig. 1
PROPER USE
This surface cleaner can be used on various
materials, including plastic, concrete, tiles, natural
stone, and more.
APPLICATION
CLEANING FLOOR SURFACE
Fastern the surface cleaner to the high pressure
1/4 inch quick connect spray wand.
See Fig 2
1. Pull back the quick-connect collar
2. Push the surface cleaner into place
3. Push the collar forward.
4. Pull the trigger gun to operate the machine
Surface cleaner
Fig. 2
1
Fig. 2.1
Publicidad
