Descargar Imprimir esta página

GreenWorks SC120 Manual Del Operador página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

TIPS FOR CLEANING
Outdoor surfaces should be swept before the
surface cleaner is used to avoid damaging the
high pressure nozzles.
The surface cleaner is not suited for scouring or
scrubbing.
If striping or swirl marks occur, slow your pace.
If striping or swirling continues, the surface
cleaner nozzle(s) may be clogged. Disconnect
surface cleaner from pressure washer spray
wand before servicing. Using a straightened
paper clip or nozzle cleaning tool (not provided),
free any foreign materials clogging or restricting
the nozzle.(See Fig.3)
CAUTION
WARNING
See Fig 1
Do not run over free standing corners. DO NOT
lift or tilt the surface cleaner from a horizontal
surface while connected to the spray gun
during operation.
GENERAL INFORMATION
ENVIRONMENTAL PROTECTION
The packaging material can be recycled.
Please do not place the packaging into the
ordinary trash for disposal, but arrange for the
proper recycling.
Old appliances contain valuable material
that can be recycled. Please arrange for
the proper recycling of appliances. Please
dispose of your old appliances using the
appropriate collection system.
CARE
Use a moist cloth to clean surface cleaner after
use.
NOZZLE
CLEANING TOOL
Fig. 3
Fig. 4
2

Publicidad

loading