Phonic IS16v1 Manual Del Usuario página 22

3.3 Main Tab
3.3.1 Main Fader
This fader will adjust the final output level of the Main mix.
3.3.2 Level Meter
This stereo level meter shows the final output level of the Main. By pushing the Meter Pre/Post button that is included next to this meter,
users are able to also view the pre-fader signal.
3.3.3 On/Off Button
This button will activate and deactivate the Main mix. When set to off, the Main mix will not be sent through the Main output jacks.
3.3.4 Stereo / Mono Button
Pushing this button will adjust the main output signal between a stereo signal and a mono signal. This effectively bypasses the pan controls
on all channels and combines stereo signals.
3.3.5 AES/EBU Level Fader
This fader will adjust the incoming signal level from any external AES/EBU-enabled device currently connected to the appropriate XLR
AES/EBU inputs on the rear of the IS16.
3.3.6 AES/EBU Meter
The incoming signal levels from the AES/EBU input can be viewed through this meter.
3.3.7 AES/EBU In Button
When the Main mix is active, the AES/EBU button will allow the Digital input signal (received through the AES/EBU input) to be sent to the
main mix. The Digital output signal, taken from the main stereo mix, will always be activated.
18
IS16