Publicidad
STEP 15
WARNING
Serious or fatal crushing injuries
can occur from furniture tip
over.
To prevent tip over:
* Install tip over restraint
provided
* Unless specifically designed to
accommodate, do not set TVs or
other heavy objects on the top
of this product
* Never allow children to climb
or hang on drawers, door, or
shelves
Use of tip over restraints may
only reduce, but not eliminate
the risk of tip over
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket aligned in this
location.
To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety bracket into the
stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully tighened in step 6.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is flush.
Move your unit into location and fasten the wall bracket to the wall anchor with the screw.
Tighten the screw that was not fully tightened in step 6.
ameriwoodhome.com
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL
15c
TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY
15d
BRACKET PROVIDED WITH THIS PRODUCT.
(x1)
15d
#A84050
15c
21
hole
wallboard
For Masonry,
Concrete, or other wall
materials:
Consult your local
hardware store for
appropriate anchors to
securely attach the
safety bracket.
stud
You
Tube
Publicidad
