OK. 50BT-B Manual De Instrucciones página 22

EN
UNPACKING
• Remove all packaging.
• Check for the presence of all parts and for transport damage. In case of damage or incomplete
delivery, please contact your dealer (
• Please keep the packaging. The appliance can be stored in it, if not used for a longer period of time.
WALL MOUNTING - PREPARATION
• The incorporated wall mount brackets (on the back) can be used to fix the soundbar to a wall. The wall
mount brackets are designed for use on vertical walls constructed of solid concrete or bricks.
• When installing on a cinderblock wall, verify first that the blocks have a minimum of
concrete wall thickness to be used for the wall plugs.
• If you are uncertain about the construction of your wall, please consult a qualified contractor or
installer for assistance.
• Ensure that the screws you want to use are strong enough to support the weight of the soundbar and
long enough to sufficiently grip the wall while still allowing
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Use an electronic stud finder to check the wall type before drilling and mounting.
• During mounting, keep away children and pets.
• Make sure the soundbar is mounted in reach to the next wall outlet.
MOUNTING SOUNDBAR ON THE WALL
Drill 2 parallel holes (Ø
1
holes should be
Insert 2 wall plugs (not supplied) into the drilled holes. Use a hammer if necessary.
2
Insert 2 screws (not supplied) into the holes and tighten. Take care to leave
3
screw heads and the wall.
Hook the soundbar into the screws. Ensure that the screw heads slide firmly into the narrow part of
the brackets.
• Now the appliance is mounted in place.
CONNECTIONS - USE THE OPTICAL SOCKET
• Use an optical cable (not included) to create a digital connection to a TV, DVD, Blu-Ray player or other
suitable devices.
Connecting an optical cable (not included):
4
One end to the TV's optical out socket.
The other end to the OPTICAL socket on the soundbar.
Notes:
• In order to receive digital signals, you need to activate PCM (Downmix) in the settings menu of your
source device.
• The digital optical cable or connector might be labelled as SPDIF OUT or OPTICAL OUT.
USE THE AUX SOCKETS
Note:
To connect to the AUX sockets, you can use either a RCA to
RCA audio cable (not included).
IM_OCS 100BT-B_V06.indb 22
Warranty card).
3-8 mm each according to wall type) in the wall. The distance between the
580 mm.
22
5 mm between screw head and wall.
3.5 mm audio cable (included), or a RCA to
2.5 cm of actual
5 mm between the
1/3/2017 11:33