OK. 50BT-B Manual De Instrucciones página 24

EN
SETTING VOLUME
• Set the volume with VOL + / VOL - (Range:
• Press repeatedly or press and hold for fast adjustment.
• The number indicating the volume level appears briefly on the display.
• Muting sound: Press MUTE once.
• Cancelling mute:
- Press MUTE again, or
- press VOL + / VOL - .
SETTING EQUALIZER
• Press EQ to choose a preset equalizer mode. Available settings: FLAT / POP / ROCK
• The selected equalizer mode appears briefly on the display.
• The selected equalizer mode is saved in the memory even after the appliance is set to standby mode.
SETTING DISPLAY BRIGHTNESS
• Press DIMMER repeatedly to set the desired brightness for the display.
OPERATION - SELECTING A SOURCE
• You can have several external devices connected permanently to the appliance and select a desired
source to be activated.
• Press repeatedly SOURCE on the remote control,
or / button on the soundbar to toggle between the sources.
• Available sources are:
AUX / MP3 LINK / OPTICAL / BLUETOOTH
• The display shows the connected source:
Source
AUX
MP3 LINK
OPTICAL
BLUETOOTH
Note:
The source selection is saved in the memory even after the appliance is set to standby mode.
• Use the volume and equalizer controls of the soundbar to regulate the audio settings (
functions).
• Use the controls of the connected external device to regulate the playback. Alternatively, use the
playback controls of the soundbar (
Note:
The audio output of this appliance is effected by the settings of the connected source. If necessary,
adjust the settings of the source device to improve the audio output.
IM_OCS 100BT-B_V06.indb 24
00 - 32).
Display Description
L1n1 Connection with a RCA to RCA audio cable.
L1n2
Connection with a RCA to
OPt Connection with an optical cable.
bt
Connection to a Bluetooth device via Bluetooth connection.
Playback functions).
24
3.5 mm audio cable.
Basic
1/3/2017 11:33