INSTRUCTIONS FOR USE
1. Plug the 12 volt auto adapter into your vehicle's 12V DC outlet and plug the
receptacle end into the input jack, located along the side of the cushion.
2. Press the massage button on the control panel once for low intensity
massage (Fig. 1). Press it again for medium intensity massage. Press
the massage button a third time for high intensity. To turn the massage
off, press the massage button a fourth time.
3. To activate heat function, press the heat button once (Fig. 1) . Press the
heat button again to deactivate the heat function.
Note: When selecting the heat feature, there will be a slight decrease in
the strength of the massage output. This adjustment is perfectly normal
and should not be interpreted as a defect.
Note: Heat and Vibration massage may be used at the same time, or
they may be used individually.
Caution: All servicing of this massager must be performed by authorized HoMedics service
personnel only.
Note: There is a 15-minute auto shut off on the unit for your safety.
All manuals and user guides at all-guides.com
4
MAINTENANCE
TO STORE
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed
objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power
cord around the unit. Do not hang the unit by the controller cord.
TO CLEAN
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge.
Never allow water or any other liquids to come into contact with the unit.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish, paint thinner
to clean.
• Do not attempt to repair the massager. There are no user serviceable parts. For service, call the
Consumer Relations telephone number listed in the warranty section.
Fig. 1
Please note: Not recommended for use on wooden surfaces as the zipper may damage the
wood. Caution is also recommended when using on upholstered furniture.
5