Changing the Position of the PIP Window
4
Press the ▲ or ▼ button to select Position, then press the ENTER button. Press
the ▲ or ▼ button to select the desired PIP window position, then press the
ENTER button.
In Double Window (
➢
selected.
If the PIP window is set to Double Window (
➢
mode, the screen size or alignment may slightly differ depending on the signal
type.
Changing the PIP Channel
5
Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press
the ▲ or ▼ button at the bottom of the remote to select the desired channel in the
PIP window, then press the ENTER button.
➢
The channel can be active when the sub picture is set to TV.
Press the EXIT button to exit.
Press the PIP CH
channel.
Freezing the Current Picture
1
Press the STILL button to freeze a moving picture.
➢
Normal sound will still be heard. Press again to cancel.
To prevent screen burn-in, this function will automatically cancel after 5
➢
minutes.
While V-Chip is in operation, the Still function cannot be used.
➢
BN68-01192B_Eng-1.indd
34
) and Double Wide (
and
CH
and buttons on the remote control to change the PIP
English - 34
) modes, Position cannot be
) or Double Wide (
)
T V
PIP
PIP
: On
Size
:
Position
:
Channel
: DTV Air 3 - 0
Move
Enter
Return
T V
PIP
PIP
: On
Size
:
Position
:
Channel
: DTV Air 3 - 0
▲
DTV Air 3 - 0
▲
Move
Enter
Return
�����
���
��
2007-04-30
ソタネト 6:27:41