Kohler K-5401-0 Guia De Instalacion página 7

4. Secure the Toilet
CAUTION: Risk of property damage. Do not rock or lift the toilet after placement. The seal
created by the wax ring may be broken, resulting in leaking.
CAUTION: Risk of product damage. Do not overtighten the mounting studs. Do not cut or shorten the
studs.
Position the wax ring on the floor flange.
Align the toilet over the floor flange and studs.
Lower the toilet onto the floor flange with the holes in the base of the toilet aligned with the studs.
Carefully align the toilet on the centerline.
Press down evenly on the toilet to set the wax ring.
Install a washer on each stud.
Thread two nuts onto each stud.
Handtighten the nuts.
Wrench-tighten the nuts one quarter turn past hand tight.
Kohler Co. 7
Nut
Nut
Washer
Bolt
1226974-2-E