Power Dynamics PD4 Serie Manual De Instrucciones página 5

DSP SPEAKER MODE
In below schedule is the DSP frequency range of all four modes. The black line in the middle is the zero.
You can see the type of frequency of each DSP speaker mode.
Description:
RED = PA
BLUE = MONITOR
GREEN = SUB
YELLOW = SPEECH
PA mode:
This is the default setting for the loudspeaker. Use this setting when your loudspeaker is being used on a
speaker stand.
Monitor mode:
Use this setting when your loudspeaker is being used as a stage monitor.
Sub mode:
Use this setting when combined with a subwoofer. Low-frequency is filtered out of speakers.
Speech mode:
Use this setting when your loudspeaker is being used for speech or presentations.
.
BT- CONNECTION
1. Turn the power ON, press the pair button for two seconds, the paired LED will flash.
2. Enable BT on you device and select MIXER-01 as the device. When paired successfully, the
paired LED is light solid.
5