Steren AMP-015 Manual De Instrucciones página 17

Connection and use instructions
1.- Connect DC cables to a 12V- - - power source (red positive, black
negative).
2.- Connect speaker cables (blue positive, grey negative).
3.- Make sure that the main switch is in the off position and plug the con-
nector to amplifier.
4.- Set all controls at minimum.
5.- Turn on amplifier.
6.- Adjust volume knobs according to your needs
7.- You can activate siren for short periods of time (press switch to the left)
or for long periods (press switch to the right).
8.- Select siren's tone using selector.
6