Output Connections - Steren AMP-015 Manual De Instrucciones

Output connections

Output to low impedance speakers
This terminal has been made for low impedance speaker (4, 8 and 16ohm)
and connections with few speakers. Use this terminal with a cable not
larger than 164ft.
For a better current distribution, the amplifier requires that the total charge
be the same as the amplifier's output impedance (4, 8 and 16ohm).
Make sure that the total impedance from the connected speakers are
higher than 4ohm (4, 8 or 16ohm).
Do not raise the volume level higher than the permitted by the speaker's
input. Otherwise you can cause several damages on the speakers.
Speakers
4-16ohm
Total Impedance 4ohms
8ohm
8ohm
16ohm 16ohm
Total Impedance 8ohms
7