Maintenance Activities - BERG Beach wagon Serie Manual De Usuario

4. Maintenance activities

4.1 Frame
The frame is powder-coated, resulting in a hard finish. To prevent any rust forming it is important to regularly clean the frame. If
you want to conserve the frame with grease, only use acid free substances. You can treat damaged areas with paint.
4.2 Wheels/tires
The wheels are equipped with ball bearings. Regularly check the rims and tires for any damage (for example cuts, cracks and
bulges). Take care: damaged rims and tires can lead to accidents! The correct tire pressure is shown on the outside of the tire. If
the tires are at the correct pressures the beach wagon will be light and easy to handle. If the tire pressures are too low, the tires
will leak quicker and will suffer undue wear and tear. If the tire pressure is too high, the tire can for example, come away from the
rim, resulting in dangerous situations. Remember that in bright sunlight and at high temperatures the tire pressures increase!
The tires must not come into contact with oil, grease or fuel. Make sure that the valve caps are always fitted on the valves.
4.3 Steering
The steering equipment must be checked every month for the following:
• Breakage, wear and tear and/or damage to the steering equipment.
• All the nuts and bolts must be tight.
4.4 Plastic and wooden parts
The plastic parts must be checked regularly for damage and breakage. In the case of breakage you must immediately replace the
part concerned with an original part, in order to guarantee the safety of the user.
III. Guarantee
5. Guarantee period
The owner of this BERG Toys product has the following guarantees on this product:
The frame is guaranteed for two years from the date of purchase and parts are guaranteed for one year from the date of
purchase.
No guarantee is given for parts that are liable to wear and tear (such as tires).
4
Beach wagon