ASROCK H55DE3 Manual De Instrucciones página 23

All manuals and user guides at all-guides.com
2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATAII Connectors
SATAII_4
(SATAII_1: see p.2, No. 14)
(SATAII_2: see p.2, No. 13)
(SATAII_3: see p.2, No. 15)
(SATAII_4: see p.2, No. 12)
SATAII_3
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB10_11)
(see p.2 No. 11)
(9-pin USB8_9)
(see p.2 No. 18)
(9-pin USB6_7)
(see p.2 No. 19)
ASRock H55DE3 Motherboard
These four Serial ATAII (SATAII)
connectors support SATA data
SATAII_2
cables for internal storage
devices. The current SATAII
interface allows up to 3.0 Gb/s
SATAII_1
data transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
Besides four default USB 2.0
ports on the I/O panel, there are
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
2 3 2 3 2 3 2 3 2 3