22
English
3.3.15 The battery has auto reset thermal protection, which prevents charging should the
temperature be too high. Disconnect the battery from the charger for a few minutes before
charging it again. Charging will start again automatically when the temperature has returned within
the safe range of values.
3.3.16 The power supply voltage of the battery charger must match that indicated on the technical
data nameplate. Do not use any other type of power supply.
3.3.17 It is advisable to install a trip switch on the electrical power supply line. Consult your electrician.
3.3.18 Do not damage or tread on the power supply cable. Do not pull the battery charger by the cable.
Do not pull the cable in order to unplug it from the power supply.
3.3.19 Any extension cable must have a higher section than that of the battery charger cable and
correctly sized according to its length.
3.3.20 If the appliance is blocked because the battery runs out, do not continue to press the start
button, otherwise the battery fails hopelessly.
95381_E12B.indb 22
All manuals and user guides at all-guides.com
2019/6/3 下午4:15