Publicidad
Idiomas disponibles
Idiomas disponibles
Data
Dimensions (L*W*H), in / mm
Gas tank size, max (DxH), in / mm. See Note 2
Gas amount in tank, max, lbs / kgs. See Note 2
Gas tank weight (incl. gas), max lbs / kgs. See Note 2 50 / 25
Engine fuel
Engine oil
Engine parts
Note 1: As specified by engine manufacturer. The power rating of the engines indicated is the average net power
output (at specified rpm) of a typical production engine for the engine model measured to ISO3046, SAE J1940/
J1995. Mass production engines may differ from this value. Actual power output for the engine installed in the final
product will depend on the operating speed, environmental conditions and other variables.
Note 2: Only use gas tank compliant to DOT specifications. Ask your authorized dealer.
Service
WARNING: Before cleaning and servicing
the product, you must turn it off, disconnect
the battery and propane tank.
CAUTION: Wait until the fan impeller has
completely stopped, then carry out the
service on the product. The exhaust
becomes very hot even if the engine runs for
just a short period of time.
•
Avoid cleaning with a high pressure cleaner. If
necessary, do not direct at the openings on the dust
extractor, especially the opening for cooling air.
•
Before moving the dust extractor from the work area,
the dust extractor must be cleaned and the inlet
must be locked using the inlet valve.
•
All other equipment must be regarded as
contaminated and be treated thereafter.
Replacement parts, Filters and Dust collection system
Part no:
590429201
590396101
590438801
590430202
590429801
570 - 003 - 07.06.2018
T 8600 Propane
55x27x69 / 1400x700x1775
12.2x23.5 / 310x600
20 / 10
SERVICE
Description
Longopac (4-bags)
Plastic bags (25-pcs)
Pre-filter T 8600 Propane
Pre-filter S 36 Propane
HEPA FILTER S-LINE
See engine manufacturer manual.
•
If possible, use a special suitable room.
•
Proper personal protective equipment must be used.
Dust can be spread when the coarse filter and the
absolute filter are replaced, which can be hazardous
to health. Accordingly, the user should wear
protective glasses, protective gloves, and a
breathing mask conforming to protection class FFP3.
•
All contaminated parts after service must be properly
disposed of in plastic bags according to all local
regulations.
•
If the product has to be used for other purposes, it is
extremely important that the product is cleaned to
avoid the spread of hazardous dust.
•
Do not puncture the HEPA filter to prevent dust
dispersion.
•
The correct distance between clutch plates is 0.5
mm (-0.2 + 0.3)
T 8600 Propane
1
1
1
N/A
N/A
S 36 Propane
46x27x63 / 1170x693x1590
12.2x23.5 / 310x600
20 / 10
50 / 25
S 36 Propane
1
1
N/A
1
2
13
Publicidad
