Publicidad
Idiomas disponibles
Idiomas disponibles
Refill water during operation
1.Unplug the power cord and disconnect the power supply
2.Press down the steam button to release the pressure until no steam is injected out.
3.Slowly unscrew the safety cap but do not remove it, and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place to
cool it down for about five minutes. Finally, completely remove the safety cap.
4.Use the funnel and measuring cup to refill a suitable quantity of cold or hot water into the
tank.
5.Re-install the safety cap onto the machine body and tighten it in position.
After the machine is used
1.After the cleaning machine is used, unplug the power cord and disconnect the power
supply.
2.Press down the steam button to release the pressure until no steam is injected out.
3.Slowly unscrew the safety cap but do not remove it, and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place to
cool it down for about five minutes. Finally, completely remove the safety cap.
4.Empty the residual water in the tank and clean the external surface with a piece of dry
cloth.
5.At last, re-install the safety cap onto the machine body and tighten it in position.
Notes: Re-install the safety cap onto the machine body and tighten it in position.
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe
recycling.
DISPOSAL
7
Publicidad
