Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Side Panel Controls
POWER light indicator
To turn the TV ON, press the power button
located on the right side of the TV set.
A red stand-by indicator lamp located on
the lower right corner of the front bezel
is illuminated. The LCD TV is now ready for
remote ON/OFF operation.
Indicating Lamp Power Status
Off
Lights
Red
Lights
Blue
Lights
Orange
(Power Saving)
Blinking
Blue
REMOTE CONTROL sensor
Point your remote at this area when selecting
channels, adjusting volume, etc.
INPUT- FRONT JACKS
INPUT- FRONT provide composite Video jacks for
connecting equipment with this capability,
such as a DVD player or Camcorders.
1.
Your HITACHI LCD TV will appear to be turned OFF (lights orange) if there is no video input
NOTES:
when INPUT : 1, 2, 3, Front and HDMI 1, 2 , Front. Check the Power Light to make sure the TV
is turned off or in Stand-by mode (lights red) when not in use.
2.
Remote Control can not turn ON/OFF the "MAIN POWER" of the TV.
12
OFF.
When the TV set is unplugged from AC line.
OFF.
When the TV set is plugged to the AC line.
(Stand-by)
On
TV POWER is ON ; picture is shown.
TV POWER is ON with no signal input
Off
except antenna (no sync. signal).
On
When TV receives the IR signal from R/C.
Indicating Lamp
Operating
R/C sensor
Publicidad
