Descargar Imprimir esta página

Clatronic HS 2631 Instrucciones De Servicio página 34

Ocultar thumbs Ver también para HS 2631:

Publicidad

Nozzles:
Small brush nozzle: for the vacuuming of narrow surfaces and corners.
Large brush nozzle: for the vacuuming of large surfaces.
Hose with crevice nozzle: perfect for vacuuming the interior of cars.
These nozzles are perfect for furniture, upholstery, frames and plenty more.
Shoulder straps:
Hook the ends of the shoulder strap with the snap-link in the eyes (4 and 6). Make sure that
the shoulder straps are not wound up.
The length of the shoulder strap can be adjusted with the buckle on the strap by simply
pulling one side of the strap. Thanks to its light weight the hand vacuum can be hung
without problems and used anywhere.
AVVISO:
Always remove the mains lead before cleaning!
Under no circumstances should you immerse the device in water for cleaning purpo-
ses. Otherwise this might result in an electric shock or fire.
CAUTION:
GB
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
1. To clean the filter, press the button (2) to open the device.
2. Remove the filter and knock it. The filter can be cleaned under running water. Make sure
that the filter is perfectly dry.
3. Mount the dust container again and close the vacuum as described in „Putting the
Appliance into Operation".
4. Clean the casing with a dry cloth.
Always pull the plug out once you have finished using the vacuum. The vacuum can be
stored vertically without wasting any space.
34
-HS 2631.indd 34
Cleaning
After use
17.11.2009 15:42:12 Uh

Publicidad

loading