Publicidad
Attach the Arm Assembly
Slide the Arm Assembly onto the Pole Assembly, hold at
1.
the desired mounting height, and tighten the built-in 5 mm
Hex Screw, using the 5 mm Hex Key. (Figure 11)
Fit the Cable Management Attachment into the base of the
2.
uppermost portion of the Arm Assembly and hold in place.
(Figure 12)
Thread three M5 x 6 mm Screws through the Cable
3.
Management Attachment and into the Arm Assembly and
tighten, using a Phillips Head Screwdriver.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Arm Assembly
Pole Assembly
5 mm Hex
Screw
Figure 11
Figure 12
12
M5 x 6 mm Screws
Cable
Management
Attachment
Publicidad
