Axis Communications P5522 E PTZ Instrucciones De Instalación página 13

AXIS P5522–E PTZ Dome Network Camera
Control Button
For location of the control button, see Hardware Overview on page 10.
The control button is used for:
• Resetting the product to factory default settings. See page 18.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Restart Button
Press the restart button to restart the product.
SD Card Slot
NO TICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools or excessive force when inserting
or removing the SD card.
• Risk of data loss. To prevent data corruption, the SD card should be unmounted before
removal. To unmount, go to Setup > System Options > Storage > SD Card and click
Unmount.
This product supports SD/SDHC/SDXC card (not included).
For SD card recommendations, see www.axis.com
Specifications
Operating Conditions
Product Classification
AXIS P5522–E IEC 60721-4-3
Class 4K1, 4C3,
4M3
IEC 60529 IP66
NEMA 250 Type
4X
Temperature
-20 °C to 50 °C
(-4 °F to 122 °F)
13
Humidity
Humidity 15-100% RH
(condensing)