Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 9
1. Slide right back board (11) into grooves on middle side panel (3), right side panel (4) and right
shelf board (7).
2. Insert 8 wood dowels (C) into wood dowel holes on bottom board (8) .
3. Attach bottom board (8) to left side panel (2), middle side panel (3), right side panel (4) and
divider board (5) by inserting wood dowels (C) into wood dowel holes on left side panel (2),
middle side panel (3), right side panel (4) and divider board (5). Make sure right back board (11)
slides into grooves on bottom board (8).
4. Insert 8 screws (D) through holes on bottom board (8), then tighten to left side panel (2),
middle side panel (3), right side panel (4) and divider board (5).
STEP 10
A
A
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Slide left back board (10) into grooves on left side panel (2), middle side panel (3) and bottom
board (8).
3. Attach top board (1) to left side panel (2), middle side panel (3) and left back board (10) by
inserting cam bolts (A) into cam bolt holes on left side panel (2) and middle side panel (3).
Make sure left back board (10) slide into grooves on top board (1).
4. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and middle side panel (3), then
rotate clockwise to secure cam bolts in place.
9
2
3
C
C
A
A
1
7
5
C C
11
C C
8
D
D
D
D
1
10
B
B
B
B
2
4
C
C
D
D
3
D
D
Publicidad
