●
During heating, there may be drops of water dripping from the pressure release hole of the
multifunction valves. This is a normal phenomenon. If there is a large amount of water leak,
please contact customer care center for repair. This pressure release hole shall, under no
circumstances, be blocked; otherwise, the heater may be damaged, even resulting in
accidents.
●
The drainage pipe connected to the pressure release hole must be kept sloping downwards.
●
Since the water temperature inside the heater can reach up to 75℃, the hot water must not be
exposed to human bodies when it is initially used. Adjust the water temperature to a suitable
temperature to avoid scalding.
●
Unscrew the thread screw on the multifunction safety valve, and lift the drain handle upwards.
(See Fig.1) to drain the water from the inner tank.
●
If the flexible power supply cord is damaged, the special supply cord provided by the manufacturer
must be selected, and replaced by the professional maintenance personnel.
●
If any parts and components of this electrical water heater are damaged please contact
customer care center for repair.
●
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
●
Children should be supervised to ensure that they do not play with the appliance.
2. PRODUCT INTRODUCTION
2.1 Technical Performance Parameters
Volume
Model
(L)
OHTC30
30
OHTC50
50
OHTC80
80
OHTC100
100
2.2 Brief introduction of product structure
Heating element
B
Hot water outlet
Rated
Rated
Power
Voltage
(W)
(ACV)
1500
220-240
1500
220-240
1500
220-240
1500
220-240
A
Cold water inlet
C
Heating indicator light
3
Rated
Max Of Water
Pressure
Temperature
(MPa)
(℃)
0.75
75
0.75
75
0.75
75
0.75
75
Shell
Thermometer
Inner tank
Thermal insulation
Anode rod
Water
Protection
Proof
Class
Class
I
IPX4
I
IPX4
I
IPX4
I
IPX4
D