Descargar Imprimir esta página

Hoover Otsein OHTC30 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting handle for
mixing valve
If the users want to realize a multi-way supply system, refer to the method shown in fig.5
for connection of the pipelines.
Triple joint
Water pool
Please be sure to use the accessories provided by our company to install this electric
water heater. This electric water heater can not be hung on the support until it has been
confirmed to be firm and reliable. Otherwise, the electric water heater may drop off from
the wall, resulting in damage of the heater, even serious accidents of injury. When
determining the locations of the bolt holes, it shall be ensured that there is a clearance
not less than 0.2m on the right side of the electric heater, to convenient the maintenance
of the heater, if necessary.
Hot water outlet
Hot water
Cold
Hot water
water
outlet
inlet
Mixing valve
NOTE
Cold water inlet
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Main machine
Pressure relief valve
Water inlet valve
Water inlet valve
6
(Fig.4)
Shower nozzle
Running water pipe
(Fig.5)

Publicidad

loading

Este manual también es adecuado para:

Otsein ohtc50Otsein ohtc80Otsein ohtc100