Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
28
English
Untitled-1 28
3. Press the locking tab to disconnect the
wire connector.
CAUTION
When relocking the tab, make sure to fully
connect the wire connector. Otherwise, the
FlexZone™ will not operate.
4. Remove the hex-head bolt on each side
of the drawer using a 10 mm socket
wrench.
5. Lift up to remove the drawer front of
the FlexZone™ from the rail assembly.
CAUTION
• Use caution when removing the rail
assembly, which may fall off causing
damage to the floor.
• Make sure to put the FlexZone™ drawer
in place after removing or mounting
the FlexZone™ basket. The FlexZone™
drawer may not open or close if the
freezer drawer is not in place.
• Do not store too much food in the
FlexZone™ drawer. This prevents
the FlexZone™ drawer from closing
properly, resulting in frost buildup.
2019-03-07
11:16:56
Publicidad
