Hansgrohe Raindance 26481 1 Serie Instrucciones De Montaje página 2

Tools Required / Outiles Utiles /
Herramientas Útiles
10 mm
13 mm
24 mm
2
8 ⅜ "
10 ¼ "
9 ½ "
10 ¼ "
English
Technical Information
Flow rate
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This trim is for use with rough 26471181 (not
included).
• This showerhead is for use with automatic com-
pensating valves rated at 2.5 GPM (9.5 L/min)
or less.
• To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
2.5 GPM